
Máy đo silicone Lab X5000
- Thiết bị đo, phân tích hàm lượng silicone trên giấy hoặc màng PET, Lab X5000, Silicone coatweight analysis.
- Mã sản phẩm: Lab-X5000
- Xuất xứ: Nhật Bản
- Thương hiệu: Hitachi
- Kho hàng: Đặt hàng
- Tài liệu: Tải về
LAB-X5000 Silicone coatweight analysis.
Dòng thiết bị dùng để đo và phân tích hàm lượng (trọng lượng) silicone trên nền giấy hoặc trên nên PET, Thiết bị được ứng dụng rộng rãi ở nhiều lĩnh vực như sản xuất giấy, sản xuất bo mạch dẻo....
Thiết bị do hãng Hitachi sản xuất chuyên dùng để phân tích silicone.
The LAB-X5000 is ideal for paper and film producers wanting cost-effective quality assurance for release liners, double-sided film and more.
At its heart is a high-resolution X-ray fluorescence detector, developed by Hitachi High-Tech for precise and repeatable results in laboratory and production environments. However, it is the LAB-X5000’s design that really drives its efficiency. Sample preparation and testing processes are intuitive, requiring minimal operator training. And the LAB-X’s technology enables high testing throughput, allowing adjustments to your process to be made quickly, saving you money.
The instrument’s settings can be fine-tuned to ensure the perfect silicone coatweight is achieved without waste of expensive material. Your customers get quality products time after time, while you benefit from improved efficiency.
Technical Specification
LAB X5000 Series
Device type code LXDS2860
Rated voltage 100 V AC to 240 V AC
Rated current 1.5A
Rated frequency 47 Hz – 63 Hz
Fuse T 2A H 250 V
Average power consumption 60W
Operating temperature range +10 ˚C to +35 ˚C / +50 F to + 95 F
Storage temperature range -10 ˚C to +50 ˚C / +14 F to + 122 F
Recommended storage temperature Room temperature
Operating humidity range 20 % RH to 80 % RH
Maximum operating altitude 2000 m / 6500 ft
Embedded storage NAND 4 GB Flash Memory
Available storage space 2.3 GB
Maximum measurement count 100 000
Dimensions (W x L x H) 440 mm x 520 mm x 155 mm
Weight 20 kg
Pollution Degree PD2
Ingress Protection degree Not classified
Overvoltage category II
Helium purge gas requirement Purity min. 99%, clean and dry
Helium consumption 2.2 slpm
X Ray Tube
Target material Palladium (Pd) or Titanium (Ti)
Window thickness 0.005 in
Anode voltage range 4 kV to 30 kV
Maximum anode current 0.75 mA
Maximum anode power 3.0 W
Nominal filament voltage 2.5 V
Maximum filament current 1.3 A
Minimum counts 24000 1/s
Ambient temperature range 0˚C to +40 ˚C / +32 F to + 104 F
Maximum package temperature 55 ˚C / +131 F
- Tin Tức Nổi Bật
AMETEK VIETNAM
26/10/2024
EDAX Vietnam
26/10/2024
Túi khí chèn hàng container
21/11/2022
Đá mài kim cương là gì
15/11/2022