Thiết bị kiểm tra nhiễm Ion / Ionograph SMD V.

Thiết bị kiểm tra nhiễm Ion / Ionograph SMD V.

  • Thiết bị kiểm tra nhiễm Ion; Ionograph ® SMD V.
  • Mã sản phẩm: Ionograph SMD V
  • Xuất xứ: USA
  • Thương hiệu: SCS
  • Kho hàng: Có sẵn
  • Khuyến mại: 12 tháng
  • Tài liệu: Tải về
Thêm vào giỏ

Ionograph® SMD V

Dynamic testing of ionic contamination is a widely approved and followed standard. So, too, is the equipment that makes it possible — SCS Ionograph®. Available in different models, the SCS Ionograph is the industry standard of testing technology.

Product Information

The SCS Ionograph® is the industry standard for ionic contamination testing specified in commonly used cleaning standards. Using the “dynamic” testing method, this line gives you a reliable testing solution at an affordable price. Plus, the SCS Ionograph series is available in four newly redesigned models – the Ionograph SMD V and bench top modules for small, standard and large parts — all operated by our advanced SCS PowerView™ software.

SCS Ionographs offer customers reliable and efficient testing capabilities, including:

    Compliance with industry specifications including MIL-STD-2000A, IPC-TM-650 and ANSI/J-STD-001
    Control of aqueous and semi-aqueous cleaning processes for bare and assembled printed circuit boards
    Control of both the cleaning and the no-clean processes
    Testing to prevent corrosion or product performance problems associated with ionic contamination
    Cleanliness testing of performance-sensitive small parts
    Cleanliness testing of cleanroom specific products such as gloves, fixtures, assembly tools and critical assembly components used in precise manufacturing
    Process control of no clean/low residue processes, including spray fluxer set up and monitoring

SCS Ionograph SMD V Features

    Designed for large part ionic contamination testing in a production environment
    Submerged agitation jets and optional heated extract solution provide outstanding sensitivity
    Available with convenient onboard all-in-one computer or tablet
    Operated with SCS PowerView software
    Test cells available in four test cell sizes

About heated solution testing.

The SMD V gives you the option to test with a heated solution. As IPC-TM-650 describes the benefit, testing with heated solution enables you to “accelerate and improve the efficiency of extraction of ionic material from poorly accessible regions, such as under surface-mounted components.”

Product Information

Specifications

Test Cell Sizes (W x H, D) - 18 x 20 in / 45.7 x 50.8 cm, 5 in / 12.7 cm at top and 3.1 in / 7.9 cm at bottom
- 26 x 20 in / 66 x 50.8 cm, 5 in / 12.7 cm at top and 3.1 in / 7.9 cm at bottom
- 30 x 26 in / 76.2 x 66 cm, 5 in / 12.7 cm at top and 3.1 in / 7.9 cm at bottom
- 38 x 26 in / 96.5 x 66 cm, 3.5 in / 8.9 cm at top and bottom
Estimated Solution Capacity 6.5 - 15 g / 24.6 – 56.8 L
Dimensions (W x H x D) 43.5 x 39.1 x 26.7 in / 110.5 x 99.3 x 67.8 cm
Weight 382 lb / 173 kg
Power Requirements 120 VAC, 60 Hz, 10 A / 230 VAC, 50 Hz, 5 A
Maximum Operating Temp. 113° F / 45° C

*Over temperature control: double fault protection.

 

Trở thành người đầu tiên bình luận cho bài viết này!
Đăng ký nhận tin
© 2018 - Bản quyền thuộc về Công ty TNHH Thiết bị và Công nghệ MTI